Makerfire Shark: An All-in-One FPV Solution with Altitude Hold
Makerfire Blue SharkStarting under $90
- All-in-one FPV package
- Good Camera
- Altitude Hold
- Gimbals could be better
- Not good outdoors in wind
- Range: 70 meters
- Flight Time: 5 minutes
- Camera: 1000 TVL
- Size: 65 mm
The Makerfire Shark is a very good beginner FPV drone. It is an excellent indoor Tiny Whoop and the best feature is that it comes in a complete all-in-one package. You will get the drone, a remote and even a pair of FPV goggles. It is very similar to the super-popular Eachine E013. What else does the Shark bring to the table? This little Whoop from Makerfire has altitude hold. That separates it from the E013 by making it a very stable indoor flyer. This drone is a lot of fun for less than $90. Keep reading to learn more.
What is the Makerfire Blue Shark?
The Shark is a small ducted quadcopter. It has a built-in camera so you can fly it FPV (first person view). The Shark has small 6 mm motors so don’t expect a ton of power from this little machine. It is basically an Eachine E010 with a premounted camera. This setup is ideal for anyone that wants to learn how to fly FPV. You can fly this little quadcopter around the house and not worry about breaking a window or smashing up a wall.
The built-in propeller guards act like bumpers. You can literally bounce off of objects and keep on flying. While this is a great drone for beginners a lot of hard-core enthusiasts often also keep a small drone like this around to fly indoors on cold or rainy days. These Tiny Whoop drones are a blast to fly. I’ll sometimes chase my dog or even my kids around the house with one like this.
Makerfire Shark Features
There are two things that really separate the Makerfire Blue Shark from the other small ducted quadcopters. The first is that it comes with both a controller and a pair of FPV goggles. Very few come with FPV goggles. The other is that it has altitude hold. Altitude hold is an excellent feature for beginners because it helps keep the drone level while flying. It makes learning to fly a lot easier for beginners.
The Makerfire Shark also features one key takeoff and landing. It has multiple speeds and can do flips and rolls with the push of a button. There is a return to home button and headless mode, but we do not recommend using either of those features.
The camera on the Makerfire Blue Shark is a 1000 TVL resolution. This is one of the sharper cameras out there. It transmits the video via a 5.8 GHz signal from the 25 mW video transmitter.
Makerfire Remote and FPV Goggles
The remote transmitter that comes with the Makerfire Shark has a decent feel to it. It is an upgrade over the standard E010 remote for sure. However, the gimbal sticks on it do not have good feel. In particular, it sometimes would stick when I was yawing the drone. It can get the job done, but we are looking for the protocol to bind it to our T8SG Jumper remote.
The FPV goggles are small but they definitely get the job done. You can do an auto scan to find the right channel if your Shark isn’t set up right away. The goggles fit comfortably but don’t expect to be able to wear glasses or adjust the IPD on this set. There is no DVR so unfortunately, you can’t record your flights with this set. They are a good inexpensive option, but once you are ready for a good pair of goggles consider upgrading to some Fatsharks.
MakerFire Shark Cons
This little machine is a lot of fun to fly but we would have liked it to have a little more power. The 220 mah battery is nice because you’ll get a bit more power and flight time than you would from the E013. This is an excellent indoor quad, but it gets pushed around in even the slightest breeze. We would have loved to have seen 7 mm motors on this. Also, the altitude hold feature is nice and really a good thing to have for beginners, but we would have preferred the ability to turn it off much like you can with slightly larger and more powerful Eachine M80. Think of the M80 as the bigger brother to the Makerfire Shark. It is a little larger, more powerful and has a handful of solid features. Learn more about the M80 here.
Should You Get a MakerFire Shark?
If you are a beginner looking to get into flying FPV then you definitely need to consider looking at the Makerfire Shark. Its altitude hold is a nice addition to this small indoor flyer. Then after you’ve mastered it you need to look into the bigger, more powerful DYS Shark. The DYS racer is the super-charged version of the Makerfire Blue Shark. Learn more about the DYS Shark-Mako here.
|Order the MakerFire Blue Shark|
Every month we update what we believe are the best drones on the market. Check out Best Drones Now. We have also created the one-of-a-kind Half Chrome Drone Cipher™. You answer a few questions and we’ll pair you with the best drone for you.
|Best Drones Now|
Do you want to search by price? Click on your menu above or we can break it down for you. Check out drones under $50, from $50-100, from $100-200, from $200-500 or over $500. Maybe you like a good Top Ten list, we’ve got you covered.
|Drones by Price|
If you want to learn more about taking great pictures or flying FPV then check out our comprehensive guides on those topics. Also take a look at our articles on how to choose the right drone for great aerial photos or for getting started flying race drones. Learn more about drones and how to get the most out of them in our Drone Academy. In the Academy we also detail some of the advanced testing we do, including our recent addition, drone thrust testing.
I Want Videos…
|Half Chrome YouTube Channel|
This website contains affiliate links, which means we receive a commission if you make a purchase using these links. For full details visit the disclosures and disclaimers page.