This page lists all the digital downloads available from Half Chrome, each has a short description and a link to download the files.
Download the DJI FPV GoPro Mount
The Zip file contains the STL file needed to print your own GoPro mount that is optimized for the DJI FPV drone. The curvature was matched to the shell of the drone. A rib down the middle of the mount is thick enough to add screws from the inside. Our favorite tape for the job…
DJI FPV – Free Download of 3D Print Files
Download the one-and-only 3D printable CAD files of the new DJI FPV drone. Watch a video about this download and speculation regarding the upcoming DJI FPV drone. The link to download the files is at the bottom of the page.
Test Images: Mavic Air, Mavic Pro, Spark, and iPhone X
We tested the DJI's consumer drones - Mavic Air, Mavic Pro, and Spark - and we even compared them to the iPhone X. This download gets you the original unedited and uncompressed photos we took using these cameras.
Make sure you check out our full article comparing…
DJI Tello CAD Model – Free Download
Download our 3D CAD model of the DJI Tello for free. The files include the body and a separate part to close up the bottom of the quad. We successfully turned this into a real flying drone in less than an hour. The design excepts 8.5 mm diameter by 20 mm tall motors just like…
DJI Spark 3D Model
Please note that this is not in any way a leaked CAD model of the DJI Spark. This is our rendering of what we believe the smallest drone in the DJI lineup will look like. We have created STL, STEP and 3D PDF files so you can view the Spark from all angles in your…
Whoop Chrome 3D Printable Frame
The Whoop Chrome frame is our answer for a 3D printable Tiny Whoop frame. This frame has some great features that are not standard on the stock Inductrix frame. What makes this frame better? Build this out of ABS and it will not break the first time you make a hard landing. The stock Inductrix frame…
LG 360 Cam Mount for Syma X8 and MJX
This simple 3D object allows you to mount the LG 360 Cam on the bottom of a Syma X8 or MJX drone like the Bugs 3. Read more about the camera upgrade options in this article. If you have questions or comments please contact us at info@halfchrome.com.
Walkera gimbal adapter for Syma X8
You can mount a Walkera 2-Axis gimbal to any Syma X8 drone using this simple adapter. The adapter also works with MJX drones, like the Bugs 3. You can add a small screw to help secure the adapter to the drone, but it will snap into Syma drones. You can also add a small bolt…
Syma X8S Tall Legs for Gimbal and 360° Camera
The Syma X8S Tall Legs are used on the Syms X8S drones to lift the drone up higher for larger cameras like the LG 360 Cam or a Walkera Gimbal. These legs will not block the view of a GoPro, even if the GoPro is set in "wide" mode. The downloadable ZIP file includes both STEP and…